Further Information
* 100% Shimmed, Chamfered and Slotted* Powder Coated Backing Plates
* 100% Asbestos Free Formulation
* Wear and Noise Tested by Independent Laboratory for Performance Optimization
* Consistent Performance
Bed-In Instructions:
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2-3 hard stops from approximately 40-45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
Have a Question?